Floor sanding sometimes called “floor sanding” or “scratch removal, ” eliminates the top few surfaces of a wood floor by carefully sanding using coarse abrasive substances. Sanding, if done carefully, will leave the floor smooth and free from imperfections. A good-quality floor sanding Adelaide machine can help to uniformly and evenly sand the entire floor.
There are many kinds of sanding methods, all of which are designed to remove the topmost layer of a wood floor. These include drum floor sanding, which uses a large drum sander equipped with an abrasive disc; wire drum sander; hydraulic floor sanders; rotary sanders; vibratory sanders and diamond-tipped sanders. Each of these floor sanding Adelaide methods is suited to different types of flooring, and the type of sander used depends on the type of wood and the amount of dust that need to be removed. Each method requires a specific amount of work to be performed.
Before any sanding is started on the flooring, a bonding agent must be used not to damage the finish of the wood flooring and provide a smooth and even sanding. This is important because when only the grain is sanded, imperfections in the wood flooring will be apparent. When the finish is sanded in an even fashion, then the flooring will be completely smooth.
The next step in the floor sanding Adelaide process is to select the grit size that is right for the wood flooring. For example, the grit size needed for floors covered with vinyl is much smaller than the grid size required for floors covered with natural hardwood. This is because vinyl floors can be glued down and will have to be sanded down to the nub of the grain. On the other hand, the grit size needed to be much larger than what is necessary for flooring glued down. It is also extremely important not to use too much abrasive sandpaper when doing this process can damage the floor. Instead, only sand the grit and avoid touching up the rest of the floor until the final finish has been applied.
Once the floor has been properly sanded, it must then be put on a finishing screen. A finishing screen is a special glass or acrylic sheet that sits between the sanded floor and the surface that it is supposed to cover. The purpose of the finishing screen is to prevent the dust that is released during the sanding process from settling on the floor, thus making it look uneven. Instead, the finishing screen will catch most of the dust before it is released into the room. Read this article.
Once the floor has been placed on the finishing screen, the grit must then be measured and applied according to the manufacturer’s specifications. However, it is recommended that customers apply more than one grit of sandpaper per square foot of wood. For example, if you plan on sanding an interior floor exposed to a lot of moisture, you would apply twice the grit for a surface that will not be exposed to moisture. Also, never add abrasives such as steel wool or polishes to the grit. These products could damage the wood and reduce its strength.